The table below shows the scanning, switching, and read/write capabilities for each instrument module.
|
Module |
Close |
Open |
Read |
Write |
Scan, Monitor |
Digitize |
|
DAQM900A 20-Channel FET Multiplexer Module |
· |
· |
· |
|
· |
·[3] |
|
DAQM901A 20-Channel Armature Multiplexer Module |
· |
· |
· |
|
· |
·[3] |
|
DAQM902A 16-Channel Reed Multiplexer Module |
· |
· |
· |
|
· |
·[3] |
|
DAQM908A 40-Channel Single-Ended Multiplexer Module[1] |
· |
· |
· |
|
· |
·[3] |
|
DAQM903A 20-Channel Actuator/ General-Purpose Switch Module |
· |
· |
|
|
|
|
|
DAQM904A 4x8 Two-Wire Matrix Switch Module |
· |
· |
|
|
|
|
|
DAQM905A Dual 1:4 RF Multiplexer Module (50Ω) [2] |
· |
|
|
|
|
|
|
DAQM907A Multi-Function Module (DIO) |
|
|
· |
· |
· |
|
|
DAQM907A Multi-Function Module (Totalizer) |
|
|
· |
|
· |
|
|
DAQM907A Multi-Function Module (DAC) |
|
|
|
· |
|
|
| DAQM909A 4-Channel 24-Bit Digitizer Module | ·[4] | |||||
|
DAQM910A Low Voltage 20-Channel Armature Multiplexer Module |
· |
· |
· |
|
· |
·[3] |
[1] Only one channel can be closed at a time on this module.
[2] Only one channel in each bank can be closed at a time on this module.
[3] Single Channel Digitize only by utilizing the instrument's internal DMM.
[4] Digitize up to 4 channels simultaneously using the DAQM909A's onboard digitizers for each DAQM909A plug-in module inserted into the instrument.